Diamond Painting Santa Claus Bell Keychain

Manufacturing steps of DIY diamond painting key chain:
1. Open the packing box and check the special tools for diamond painting;
2. Check the color of resin diamonds and arrange them according to the coding sequence;
3. Uncover the tape image above and you will see many symbols corresponding to color coding;
4. Inlay diamonds according to the resin corresponding to the corresponding color coding fixture;
5. It is recommended that a set of resin diamonds be completed faster;
6. In order to make a perfect diamond painting, put the design in one place, and each line of symbols need not leave diamonds;
7. To cut a good figure on the drawing, please install the classification array on the plane of the upper material;
8. The splicing shall be flat, neat and free of cracks;
9. After good struggle, the remaining glue gaps conform to the symbol of diamond.

Note:
This is DIY diamond painting keychain. You need to finish it yourself. All products are measured manually, please allow 1-2cm deviation.
Because the light is different from the screen, the color of the project may be slightly different from the picture. Please forgive me.